Hitachi HTD-G2 Manual De Instrucciones página 4

MIC MIXING
TIM
& or © dD
4. Adjust the volume of the microphone (or electric
guitar) using the MIC mixing volume control @.
Howl may result when the microphone is pointed
at a speaker. To prevent this, either move the
microphone away from the speakers or make sure
that the sound pressure from.the speakers does
not affect the microphone.
socket of the timer.
2. Perform steps 1 through 5 of TAPE PLAYBACK.
3. Adjust the volume of the timer playback sound using
the VOLUME control @.
4. Press the STOP button @.
5. Set the TIMER switch @ to PLAY.
Playback now starts automatically at the set time.
TIMER PLAYBACK WITH BROADCAST
1. Set the POWER switch @ to ON and tune in the sta-
tion whose sound will be heard for timer playback.
2. Adjust the volume of the timer playback using the
- VOLUME control @.
3. Set the timer to the desired time.
Note: Keep the unit's TIMER switch @ to the OFF posi-
tion.
DAD/AUX input jacks
switch @ to DAD/AUX.
REC OUT jacks @
1. When
an external tape deck is connected to these
jacks and material is recorded,
the sound
can be
recorded simultaneously on a tape deck containing a
tuner deck.
2. Tape copying is possible when a tape is played back
in a tape deck containing a tuner deck({(FUNCTION
switch @3) — TAPE) and the sound is recorded on an
external tape deck which has been connected to
these jacks.
CAUTION:
If you turn the FUNCTION switch @ to
"DAD/AUX" by mistake while recording using an
external tape deck, vibrations may be generated
' which may damage the speakers.