Hoover HF322TP 011 Manual De Instrucciones página 10

If more power is required for a harder cleaning task, press the turbo touch button on the main body in order to rotate through
the available power modes to suit your tasks.
BATTERY USAGE
When the battery is discharging during the cleaning session, the battery pack LED is white. When the Battery capacity is lower
than 5%, the White LED light will begin to Blink.
When this happens you should stop cleaning and immediately recharge your battery. [2]
When charging the product, the swich on/off must be OFF.
It's also possible to charge the battery pack when released from the product.
The charging time of the product is 2.5 Hrs. When the battery is fully charged the LED light on the battery will illuminate white.
NOTE: It is normal for the charger to become warm to touch when charging. Use only the charger supplied with your product.
.
SAFETY PROTECTION SYSTEM
To ensure the reliability of the product is not affected if used under arduous conditions, the product features with 2 integrated
safety protection systems.
1. The Safety protection system will action if the brushbar has a blockage or is locked, once actioned the brushbar will
stop rotating, the white LED stripe on the front of the nozzle will blink 5 times. [18] If this happens, simply switch off your
product and clean the brushbar obstruction. To resume cleaning, press the on/off button and the product will restart in
normal mode.
2. The second Safety protection system will action if the nozzle window is not completely closed before use. If the window
is open, the nozzle will not switch on. If this happens, simply switch off your product and ensure the nozzle window is
correctly closed. To resume cleaning, press the on/off button and the product will restart in normal mode.
ACCESSORIES*
2IN1 CREVICE AND DUSTING TOOL*, 2IN1 LARGE DUSTING AND FURNITURE TOOL*, LONG FLEXIBLE CREVICE
TOOL*, MULTI-FUNCTION UP TO TOP TOOL * AND MINI POWER NOZZLE*
The above accessories can be fitted directly into the main body unit or the tube. [6]
NOTE: To remove the nozzle or main body unit from the tube, press the respective release button and pull apart.
RADIATOR TOOL * AND DEEP CLEANING BRUSH*
The accessory adaptor* must be fitted when using these 2 accessories. [6]
NOTE: The mini-power nozzle is ideal for deep cleaning textile surfaces (i.e. sofas) and pet hair removal. Move it steadily.
Backwards and forwards. After using, please remove hair / threads collected on the brush with scissors if necessary.
The long flexible crevice tool is ideal for cleaning in hard to reach areas, underneath furniture and in your car.
The radiator tool is ideal for cleaning inside and around cabinets, radiators and couches.
The deep cleaning brush is useful to clean in tight spaces without scratching surfaces, and inside your car.
The multi-function tool is designed to easily clean delicate surfaces without scratching and all area's that are hard to access
or reach. The multi-function tool is made up three key parts.
1. Crevice tool this is ideal for accessing tight spaces.
2. Dusting brush is ideal for cleaning surfaces without damaging or scratching.
3. Furniture nozzle is ideal for cleaning surfaces like sofa.
ACCESSORY BAG*
Accessories can be stored in the accessory bag.
CLEANING TOOL
The cleaning tool is useful to clean the single cyclone system,dust cup and nozzle.
WALL MOUNT*
Hang the wall mount to the wall, using the two screws included in the product to hang product. [7]
CLEANER MAINTENANCE
Emptying the Dust Cup
1. Press the handheld release button and remove the tube. [1b]
2. Press the dust cup flap release button to release the dust cup flap and empty the contents. [8a]
3. Close the dust cup flap, you will hear a click when fully locked.
NOTE: It is recommended to empty the dust cup after each use or when dust is up to the max fill lines.
* Certain Models Only
4
GB