Recording - Sherwood RX-4508 Instrucciones De Funcionamiento

RX-4508 AM/FM STEREO RECEIVER
To Skip Forward or Backward
1
Each time the button is pressed, a track
is skipped forward or backward.
• On the main unit, press ◄ or ►.
• On the remote control, press
.
BLUETOOTH
To Search Forward or Backward
1
Each time the button is pressed and
held, playback point is moved forward or
backward.
• On the main unit, press and hold ◄ or
► for more than 1 second.
• On the remote control, press and hold
or for more than 1 second.
BLUETOOTH
24
or
L
R
SEARCH
DISPLAY MODE
BASS TREBLE
L R
SEARCH
DISPLAY MODE
BASS TREBLE

Recording

You can make an audio recording from the built-
in tuner or from an audio source connected to
the receiver (such as a CD player or TV).
Keep in mind you can't make a digital recording
from an analog source or vice-versa, so make
sure the components you are recording to/from
are hooked up in the same way.
(For details on connection, see "Connecting
Playback Components" on page 13.)
• The receiver's volume, Audio parameters
(the tone controls, for example), and
surround effects have no effect on the
recorded signal.
• Some digital sources are copy-protected,
and can only be recorded in analog.
1
Select the desired recording source.
CD AUX
TONE
DIRECT
L
BLUETOOTH
2
Start recording on the component.
3
Start play on the desired input.
• The audio signal from the desired input
will be dubbed on the recorder and you
can enjoy them from the speakers.
• The volume and tone (bass and treble)
settings have no effect on the recording
signals.
• When recording the audio signals from
AUX, cannot be recorded on the same
AUX jack. (For example, the audio
signal from AUX IN cannot be recorded
on AUX OUT.)
PHONO TUNER
MUTE VOLUME
R
SEARCH
DISPLAY MODE