Corby Eton-E Manual De Uso Y Cuidados página 12

PLUG REPLACEMENT
(For Product fitted with BS plug)
This appliance is supplied with a BS1363 3 pin plug fitted with a 13 Amp fuse.
Should the fuse require replacement, it must be replaced with a fuse rated at 13
Amp and approved to BS1362.
In the event the mains plug has to be removed/replaced for any reason, please
note:
The wires in the mains lead on this appliance are coloured in accordance with
the following code:
Green and Yellow -
THIS APPLIANCE MUST BE EARTHED
As the colours may not correspond with the markings identifying the terminals in
your plug proceed as follows.
• The green and yellow earth wire must be connected to the terminal in the
plug which is marked with the letter E or with the earth symbol
• The blue wire must be connected to the terminal marked N
• The brown wire must be connected to the terminal marked L
Important - any cut off plug should be disposed of safely to prevent hazard.
There is a danger of electric shock if a cut off plug is inserted into a socket outlet.
1 2
Earth
Blue - Neutral
Brown - Live
Earth
(GREEN/YELLOW)
E
L
Neutral
(BLUE)
Cord
N N
Clamp
Live
(BROWN)
Fuse
(13 Amp)