Terrano Q Guía De Usuario página 14

EN 7
3. For best results clean the surface, peel of the white tape
from the Helmet Mount and place and hold in place for
at least 1 minute, wait 10 minutes.
4. Slide the TERRANO Q into the Helmet Mount and bend
the boom such that the speaker will align with the center
of your ear.
5. Repeat the process for the secondary speaker if used.
3. General
On– Press B. for 3 seconds– Three BLUE flashes– "Hello".
Off– Press C. for 3 seconds– Three RED flashes– "Goodbye".
Mute\Unmute–
Press on both A. and C. for 2 sec.
Volume–
Up– Tap on C. once.
Down– Tap on A. once.
4. Pairing Mobile via Bluetooth
1. Press B. for at least 5 sec, the
TERRANO Q will alternately flash
RED and BLUE.
2. Search for Bluetooth devices.
3. Confirms pairing successfully.