Terrano Q Guía De Usuario página 4

2
Assembly on Helmet
The unit can be placed on the left or right side of helmet.
The microphone can be rotated to support both sides.
1. Use the adhesive glue to place the Helmet Mount on
relatively flat patch on the lower back side of the helmet.
Alternatively you can use the optional Buckle Strap together
with the wider Helmet Mount.
2. For best results clean the surface, peel of the white tape
from the Helmet Mount and place and hold in place for at
least 1 minute. Wait 10 minutes to proceed.
3. Slide the TERRANO Q into the Helmet Mount and bend
the boom such that the speaker will align with the center of
your ear.
Repeat the process for the secondary speaker if used.