Publicidad
Idiomas disponibles
Idiomas disponibles
34
MED50R.indd 34
Batteries
Remove the cover that comes on the back of the tool and
place the batteries as indicated, once the batteries are in
place, close the cover.
Use two 1.5 V AAA alkaline batteries.
If the tool will not be used for a long time, remove the
batteries to avoid damage to the tool.
Start & settings
To turn on your Bellota laser distance meter, press the
button
for 2 seconds and the tool will turn on showing
the functions on the screen. To turn the tool off, keep
the button
pressed for 2 seconds. Remember that
the tool will automatically turn off after 150 seconds of
non-use.
To select the unit of measurement you need, press the
button
for 2 seconds and the units will change. By
default, the laser distance meter starts with 0,000 m,
however it has the following units of measurement
available:
28/4/22 12:17
Publicidad
