Publicidad
Idiomas disponibles
Idiomas disponibles
MED50R.indd 35
Distance
0.000 m
0.00 m
0.0 in
0 1/16 in
0'00"1/16
0.00 ft
To change the reference point, press the button
once. You can choose the upper end of the tool or the
lower base as the reference point. By default the tool
starts with the lower base of the meter as the reference
point.
The display light is programmed to turn off after
15 seconds of no activity in order to save battery
consumption.
To turn the sound on or off you just have to press the
button
for 2 seconds.
To calibrate the tool you must press and hold the button
, once the tool is turned off and without releasing the
button press and hold the button
on the screen. Once in this function you can calibrate the
tool using the buttons
9mm. Once adjusted, you only have to press the button
to save the calibration changes.
Area
Volume
0.000 m
0.000 m
2
0.00 m
0.00 m
2
0.00 ft
0.00 ft
2
0.00 ft
0.00 ft
2
0.00 ft
0.00 ft
2
0.00 ft
0.00 ft
2
in a range from -9mm to
3
3
3
3
3
3
until "CAL" is shown
35
28/4/22 12:17
Publicidad
