Publicidad
Idiomas disponibles
Idiomas disponibles
•
Set button A2 to position II.
•
Select the desired temperature using using the thermostat control B. (fig.11).
•
After reaching the desired temperature, slowly turn the thermostat control anticlockwise until
you hear a «click». The desired temperature is now set.
POWER SETTING
Convector
Power I
Power II
Convector
Power I
Power II
Power II
OVERHEAT PROTECTION
In the event of a heat build-up, an overheat protection device automatically switches off the
appliance.
If this protection is triggered:
•
Turn the appliance off.
•
Unplug the appliance from the mains.
•
Remove the cause of overheating (blocked air inlet and/or outlet grilles, obstructed air
circulation, dust, etc.).
•
Vacuum the air grilles if necessary.
•
Leave the appliance to cool down.
•
Plug the appliance back in.
•
Switch it on again.
MAINTENANCE
•
The Quickmix 2 electric convection heater only requires regular external cleaning. The
warranty does not cover damage caused by improper maintenance.
•
Before cleaning or maintenance, switch the heater off.
•
Disconnect the heater from the mains supply.
•
Wait until the appliance is cold.
•
Never immerse the appliance in water.
Quickmix 2 1500
750 W
1500 W
Quickmix 2-2000 T
1000 W
2000 W
2000 W+TURBO
Quickmix 2000
1000 W
2000 W
Quickmix 2500
1250 W
2500 W
Publicidad
