Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
(Continued)
Filter Installation
Q
D
1. Install the cartridge
filter so that it is
flush with the vacuum power head
lid. Make sure that the cartridge
filter
is pushed in until it stops against the
power head and presses the switch
down. (Fig. 1 & 2) Ensure that the
cartridge
filter is pressed against the
switch.
2. Place filter cage on the top of
cartridge
filter and lock into place by
turning the cage clockwise.
Do not
overtighten.
(Fig. 3 & 4)
Cleaning
and Disinfecting
the
Ash Vacuum
To keep your ash vacuum looking
its best, clean the outside with a
dampened
cloth, then dry with a clean
towel.
To clean the inside of the collection
tank:
1. Empty debris out.
2. Wash collection
tank thoroughly
with
warm water and mild soap.
3. Wipe out with dry cloth.
Before prolonged storage or as needed
the collection tank should be disinfected.
To disinfect
the collection
tank:
1. Pour I gallon (3.7 L) of water and 1
teaspoon chlorine bleach into the
collection
tank.
2. Let solution stand for 20 minutes,
carefully swishing every few minutes,
making sure to wet all inside
surfaces of the collection
tank.
3. Empty collection
tank after 20
minutes. Rinse with water until
bleach smell is gone. Allow collection
tank to dry completely
before placing
the power head back onto the
collection
tank.
Storage
Before storing your ash vacuum, the
collection
tank should be emptied
and cleaned. The hose, cord and
accessories
should be stored as
illustrated above so they can be readily
available when needed.
Store vac indoors.
Publicidad
