Publicidad
Idiomas disponibles
Idiomas disponibles
9) To play a different piece on the record, move the lift lever towards the back, move the raised
tone arm to the start of the piece and then move the lift lever towards the front to lower the
tone arm and start playback.
10) To adjust the volume level, turn the volume knob to the right or left.
11) At the end of the record, move the lift lever back to raise the tone arm and move it back to the
tone arm park, and then move the lift lever forward to lower the arm onto its rest.
12) Alternatively, manually lift the tone arm off the record and return it to the arm rest.
13) When you have finished playing records, engage the tone arm lock to protect it from
accidental movement.
14) Tap the POWER/VOLUME knob to switch the unit off. Unplug it from the power supply if you
are not going to use it for a while.
NOTE: Should your record stop before the last track finishes, set the auto stop control to OFF. Your
record will now play to the end, but you will have to stop the turntable rotation manually. (Return the
tone arm to its rest manually and if the turntable is still rotating, switch off the unit by the volume
control knob. Then set the auto stop control back to ON.)
Listening to an External Device Connected with AUX Input
1) Tap the POWER/VOLUME knob to turn the equipment on.
2) Use the function selector to select PHONO/AUX mode, then connect the external audio device
(such as a CD player) to the AUX IN socket at the front of the equipment. The audio signal
from the external audio device will now be played through the system.
3) If an external audio device is connected to the AUX IN socket, LC display will display AUX text.
NOTE: If you won't use the unit for a long time, you had better take the CD out from the disk tray
door.
Connect to External Audio System (RCA)
You can listen to your new turntable using the built-in speakers but you may wish to connect it to your
existing audio system. Connect the audio plugs to the Line input on your mixer or amplifier using an
RCA cable (not supplied).
• Red plug into R/H channel input.
• White plug into L/H channel input.
Using the Cassette Player
1) Push the STOP/EJECT button to open the cassette door.
-10-
Publicidad
