AGFA Realishot DC9200 Manual De Usuario página 7

CHARGING
Please use a Micro USB charging cable and charger for charging.
Charging/data transmission interface
1. When charging, the indicator light will turn on red.
2. After fully charging, the red indicator light will turn off.
Reminder: The charging light flashes slightly, indicating that the
battery is not installed or reversed. Please check if the battery is
installed correctly.
MEMORY CARD INSTALLATION/REMOVAL
Install Memory card
- Follow the OPEN label on the
bottom of the camera to open
the battery cover.
- Press the back of the memory
card towards the screen.
- Push it all the way towards
inside of the memory card slot
until you hear a « click » sound
which completes the installation.
Remove Memory card
- Please push the memory card
towards the inside of the card
slot until you hear a « click »
sound to remove it.
Attention
1. Before replacing the memory card,
please turn off the camera power.
2. Please insert the card in the correct
direction and do not use too much
force to avoid damaging the card or
related components. Memory card
cannot be inserted, please check if
the direction is correct.
3. If you are using a memory card
for the first time or have used it on
another device, please format the
memory card in the camera first.
EN
7