Timbela M018-1 Instrucciones Generales página 3

Before Installation
Please read the assembly manual carefully before proceeding with the wooden product installation to avoid problems
occurred during assembly of your purchase.
The product you have bought was manufactured, inspected and packed in accordance with the high quality norms and
supervision. In order to avoid possible problems during assembly, we recommend inspecting the delivery for its
completeness in accordance with the list of pieces before assembly. Inspection of delivery completeness has to be made
within 14 days after you have purchased the product. Warranty claims are limited to the exchange of defective
materials. Defective parts, which have been used already or painted, are void form being replaced as warranty subject.
Before assembly we recommend to treat the beams twice all four sides of the board with an oil-based protective
product-to protect the wood from fungus, blackening, and insects. After assembly, a finishing product (paint, wood
preservative or impregnation agent) should be applied to outer and inner sides of the shed- to protect the wood from
cracks, from deformation because of the sun and rain influence. By regularly applying a new finishing layer the life of
your product shall be lengthened. This should be repeated every 3 years.
We recommend:
✓ Keep the product packed until its complete assembly in a dry place, but not in direct contact with the ground.
✓ Protect from weather conditions (moisture, the sun, etc.)
✓ Do not keep the package in a heated room.
✓ When selecting the product location, make sure that the product will not be subjected to extreme weather
conditions (Areas of strong snowfall or winds); otherwise you should attach it (for instance, with anchors) to the
ground
✓ To use silicone between roof boards after installing, if the additional cover is not used.
Warranty
ATTENTION: Please be sure to keep the documentation accompanying the package! The assembly instructions first
page contains the control number of the wooden product. We can only review complaints if you submit the control
number of the product to the seller!
This wooden product is made from high quality fir or pine wood and delivered in natural (undressed) form. Wood is
natural material, growing and adapting depending on weather conditions. Large and small cracks, colour tone
differences and changes, as well as a changing structure of wood are not errors, but a result of wood growing and
peculiarity of wood as a natural material. Therefore our warranty does not cover:
✓ Peculiarities of wood as a natural material
✓ Wooden details containing whole branches that do not endanger the stability of the product
✓ Colour tone variations caused by wood structure differences that do not influence wooden part life time
✓ Wooden details containing small cracks (caused by drying) that do not pass through and do not influence the
structure of the product
✓ Twisted wooden details if they can be installed
✓ Complaints resulting from an incompetent manner of the installation of the product or the product collapsing due
to an incompetently made foundation
✓ Complaints caused by self-initiative made changes to the wooden product.
✓ The manufacturer reserves the right to change the parameters of the product details without changing the
dimensions and quality of the product.
Painting and maintenance
Undressed wood becomes greyish after having been left untouched for a while, and can become blue and mouldy. To
protect wooden parts you must overlay them with a wood preservative.
After wooden product assembly is completed, we recommend for the conclusive finishing a weather protection paint
that will protect wood from moisture and UV radiation. We recommend inspecting product painting conditions once
EN
2