Publicidad
Idiomas disponibles
Idiomas disponibles
2E
10. Apply thread sealant to cold water
supply nipple (1) and attach mounting
flange gasket (2) and mounting flange
(3) with set screw hole down to the
finished wall. Next slide escutcheon (5)
over faucet body (6) (fig. 2F).
11. Thread faucet (6) onto cold water
supply nipple (1) until water tight
connection is achieved and faucet
is level. Secure mounting flange set
screw (8) to the mounting flange
(3) and secure escutcheon (5) onto
mounting flange (3) with escutcheon
set screw (7) (fig. 2F).
2F
1
2
3
4
8
12. Remove aerator using a 22 mm wrench
(fig. 2G).
4
6
5
7
2G
22 mm
13. Turn on water and flush the faucet for
any debris (fig. 2H).
2H
14. Check for leaks and reinstall aerator
(fig. 2J).
2J
22 mm
7
EN
Publicidad
