Publicidad
Idiomas disponibles
Idiomas disponibles
6 Controlling the PTZ camera with LNR / NR Series NVRs
PTZ Controls
1.
Direction keys: Click to pan and tilt the camera. Click SIT to stop
the current action.
2.
PTZ Trace: Click to activate mouse PTZ Trace mode. You can do
the following:
•
Click and drag to move the camera.
•
Use the scroll wheel to zoom in and out.
•
Right-click to exit and return to normal PTZ controls.
3.
Zoom/Focus/Iris: Click +/- to adjust the zoom, focus, and iris.
Adjusting the camera's iris settings allow you to control the
amount of light that enters the camera's lens. The higher the iris
value, the greater the amount of light that enters the camera's
lens.
CAUTION
Adjust the camera's iris settings to match the environment
where the camera is installed. Too much light exposure might
result in a very bright camera image.
4.
Advanced controls: Click to open advanced PTZ controls.
5.
Speed: Enter a PTZ speed between 1 (slowest) and 8 (fastest).
#; r. 4.0/47037/47040; en-US
21
Publicidad
