Publicidad
Idiomas disponibles
Idiomas disponibles
12
What is included in the box
Supply of this TV includes following parts:
•
1x TV
•
1x Remote control
•
2x AAA batteries
Attaching the Stand
Please refer to the instructions at the end of this guide.
Wall mounting the TV
Install the wall mounting bracket to the television as advised by the
bracket manufacturer.
Connections
For instructions on connecting external devices, please turn to the last
page of this guide.
Getting started - initial set up
1. If rubber parts, foam parts or tape are attached to the TV frame, please
remove them gently.
2. Using the RF cable (not included), connect the TV to the TV Aerial wall
socket.
3. For connecting to the Internet with a wired connection connect a Cat 5/
Ethernet cable (not included) from the TV to your broadband modem/
router.
4. Insert the batteries supplied into the Remote control.
5. Connect the power cable to the Electrical outlet.
6. Then press Standby button to power on TV.
7. After turning the TV on, you will be welcomed by the First Time
Installation menu.
8. Please select language for TV menu.
9. Please set desired settings in remaining screens of First installation
menu.
TV standby button
The TV is equipped with a single button located at the bottom of the LED
light.
STANDBY – Standby Power On/Off
•
1x TV stand installation packet
•
1x Quick Start Guide
•
1x Warranty card
Choosing Mode Input/Source
To switch between the different input/connections.
Using the buttons on the remote control:
1. Press and hold the
(TV guide) button. The input menu is
displayed.
2. Press [▲] or [▼] to select the input you require.
3. Press [OK].
TV Menu navigation
Use the (▲/▼/◄/►) buttons to focus on the desired item.
Press the OK button to select the item currently in focus.
Press the
(back) button to go back one step in the menu.
Press and hold the
(back) button to leave menu.
Press the
(home) button to enter the TV Home menu.
Electronic instruction manual
To access more useful information directly from your TV, you can launch
the online manual by following these steps:
1. Press the
(home) button on your remote.
2. Using the cursor, navigate downwards to "Your apps".
3. From the list of apps, locate and select "Instruction Manual."
NOTE: Please ensure that your TV is connected to the
internet in order to use this electronic manual.
USB Media playback notice
This TV supports playback of a wide variety of file types from a USB drive.
However, for data security reasons, Google limit the supported file system
types.
To playback any media from a USB storage drive, the USB drive must
be formatted to a FAT16 or FAT32 file system. NTFS is not supported.
Channel list
The channel list on your TV is where you can access all of your available TV
channels in one convenient location. Follow these instructions to access
and manage your channel list:
1. Press the
(home) button on your remote control to open the home
screen.
2. Select "Live TV" from the list of apps on your home screen.
3. Make sure you are on a digital TV input (antenna, cable or satellite).
4. Press the OK button to open the channel list.
5. Use the arrow buttons on the remote to browse through the list of
available channels.
6. Press the OK button on the remote to select a channel and start
watching.
Moving channels in the channel list
Moving channels within the channel list on your TV can be a useful way to
organize your favorite channels or place them in a more convenient order.
To move channels within the channel list, follow these steps:
1. Navigate to the channel list as described above.
2. Press the red button.
3. Select [Channel Move] from the menu.
4. Use the OK button to select one or more channels you want to move.
Publicidad
