Publicidad
Idiomas disponibles
Idiomas disponibles
-
Task mode: only the main (central) LED panel is illuminated,
-
Ambiance mode: only the two peripheral LED panels are illuminated.
◾
When you turn on the light, the light mode will be the same as the last time you
used it.
◾
Press and hold the "MODE" button for 3 seconds and the light will switch to
flashing "SOS" mode. Press the "MODE" button again and the light will return to
the previous brightness setting and panel selection.
NOTE:
In "SOS" mode, all 3 LED panels will be flashing, even if before the "SOS"
mode activation only some of the LED panels were on.
NOTE:
When the temperature reaches 100°C, the main (central) light LED panel will
be turned off, and only the two peripheral LED panels will be turned on to enter the
ambiance mode.
USING THE LIGHT (Fig. 4a – 4c)
WARNING:
securely installed to prevent falling
object hazard. Failure to follow the
instruction can result in serious
personal injury.
◾
To hang the light, pull out
the hooks located in the base
of the unit and hang the light
upside down. The hook width
is 1.7 in. (44 mm). Make sure
the object that the light is
hung on is sturdy enough to
support the combined weight
of the light and the battery
pack.
◾
To mount the light on a tripod
(not included), secure the tripod
screw to the tripod mounting
hole on the bottom of the base.
The base features a 1/4"-20
threaded hole. Make sure the tripod is placed on a flat level surface.
14
56V LITHIUM-ION COMPACT AREA LIGHT — LT0300/LT0300-FC
Ensure the light is
4a
4b
Publicidad
