APETDOLA FP10 Manual página 4

M A X
M IN
5. Put the filter sponge upward into the filter groove.
MAX
MIN
7. Rotate and fasten the latch inward, place the
assembled water dispenser on a stable ground,
insert the power adapter into the female power
cord and rotate and fasten. Connect the power
supply, and the water dispenser starts to work.
Water outlet mode options
Three water outlet mode can be switched by manually to adjust the height of the umbrella ,be
suitable for the cat according to its preference.
Slot 1 fountain
Slot 2 fountain+short streamline
Slot 3 fountain+long streamline
Install method:Align the bottom of the umbrella with the water outlet of the drinking tray and
insert it vertically.
1
2
3
4. Put the filter tank into the water tank.
6. Put the drinking tray in to the filter tank,install it
into the water outlet,and adjust it to a proper height.
water outlet of the drinking tray
03
MAX
MIN
MAX
MIN
MAX
MIN