Publicidad
Idiomas disponibles
Idiomas disponibles
CALEFACTOR DE ACEITE
DRO128-9 Paneles
DRO128-9 fins oil heater
1. Press the "MODE" button until the timer icon flashes and the screen shows the number of hours,
and the automatically open icon also appears.
2. Use the "+" and "-'' buttons to set the automatic opening time of the heater(set to 1 to 24 hours).
Once the timing icon stops flashing, the timer automatically opens will be activated.
3. When the setting time is exhausted, the heat will automatically open.
Note: If the temperature is set before setting the timer to automatically open the function, the
heating will be run intermittently according to the set temperature when the timer is automatically
turned on and the heater is automatically turned on.
Note: When the timer is used to automatically turn on the function, the heater will automatically
turn on the heating function when the setting time is exhausted. Previously, if the timer was not set
to automatically close, the system silently determined that the timer would automatically close after
10 hours.
Timer function example:
Auto open example:
Settings: Automatic shutdown set to 3 hours; Automatically open set to 2 hours.
How it works: The heater will start running in 2 hours after the setup takes effect and shut down
immediately after 3 hours(for a total of 5 hours).
Examples of automatic shut down:
Settings: Automatic shutdown set to 7 hours.
Operation mode: After the setting is in effect, the heater will automatically shut down after 7 hours
of operation.
Function of Fahrenheit temperature/Celsius
Note: The heater provides the function of displaying Fahrenheit temperature or Celsius
temperature.
1. Fahrenheit temperature or Celsius temperature is only displayed on the heating file setting and
temperature setting screen.
2. Press the "F/C" button to switch between Fahrenheit and Celsius.
1. Read the instructions carefully before use and save them for future reference.
2. Always disconnect the heater from the main supply when not in use and when cleaning.
3. Do not leave the heater "ON" unattended.
4. Never cover the heater as this may lead to risk of fire.
5. Keep the heater a distance of at least 90 cm from any combustible material, such as furniture,
curtains, bedding cloths or papers.
6. Keep the heater clean. Do not allow objects to enter the ventilation, as this may cause electric
shock, fire or damage the heater.
IMPORTANT SAFEGUARDS
12
INSTRUCTION MANUAL
Publicidad
