Publicidad
Idiomas disponibles
Idiomas disponibles
CALEFACTOR DE ACEITE
DRO128-9 Paneles
DRO128-9 fins oil heater
This heater is equipped with Electronic Digital Controls that provide the ability to set the tempera-
ture to the exact degree desired .To operate , simply follow these instructions.
Electrical connection
1. Make sure that the iron voltage and the line voltage match
2. Switch the power switch to 0.
3. Only connect the mains plug to a properly installed earthed socket 110V~,50/60Hz.
Connected Wattage
The four power levels of the devices are as follows:
DRO128 9FINS 1500W
With this connected load a separate supply line protected by a 16A household circuit breaker is
recommended.
CAUTION overload:
1. If you use extension leads ,these should have a cable cross-section of at least 1.5m㎡.
2. Do not use any multiple sockets,as this device is too powerful.
3. Do not connect other high power appliances to the same circuit.
Safety Swich.
Your radiator has a safety switch which tourns offf the electricity as soon as the device falls over .
The safety seitch prevents dangerous situations caused by overheating.
LCD OPERATION
Note: The temperature display can reflect the indoor temperature correctly after the heater is
running for at least 20 minutes.
Turn on the power switch, press the power button on the control panel, and the computer board is
turned on and on.see follow picture:
OPERATE
9
INSTRUCTION MANUAL
Publicidad
