makro PROFESSIONAL Metro Professional GGW1001 Manual De Instrucciones página 28

EN
of the machine. Dry result depends by the correct temperature and correct usage of rinse aid liquid.
5 – OPERATIONAL INSTRUCTIONS
Open the
mains water
cock (utility).
5.1 – DAILY USE GLASSWASHERS
The panel shown in the manual and in the graphics may
contain functions which are not present on your machine.
Once the cycle has started, the wash cycle LED indicator turns on. If the door is opened during the cycle, the program stops.
Once
the door has been closed again, the program resets itself; to restart the cycle, press the
5.2 – DAILY USE DISHWASHERS
The panel shown in the manual and in the graphics may
contain functions which are not present on your machine.
the level of rinse
aid in the
that the filters are in the correct position, the spray arms
containers.
turn and that there are no foreign bodies in the
Make sure the overflow sits in the drain hole properly
Check:
machine.
What to do and what happens
Activate the wall switch, open the door, insert the overflow pipe
and close the door:
Press the on/off button. The ON-OFF LED indicator
on.
Once the boiler and tank have been loaded, the boiler LED
indicator turns on.
LOADING THE GLASSWASHER
Remove any solid leftovers from the glasses.
Put the glasses in the basket with their stem upwards.
Use the cutlery basket for cutlery. Put the cutlery loose in the basket,
preferably with the handle at the bottom. Be careful not to injure
yourself on the fork prongs and knife blades.
Insert the basket.
On first daily machine switch on, wait for 15 minutes after the boiler
LED indicator LED to turn off.
To start the wash cycle, press the
is 120".
Once the program has finished, the wash cycle LED indicator turns
off
and the boiler LED indicator
Remove the rack
What to do and what happens
Activate the wall switch, open the door, insert the overflow pipe and
close the door: press the on/off button. The ON-OFF indicator
turns on.
Once the boiler and tank have been loaded, the boiler LED
indicator turns on.
Switch the main
ON/OFF switch on
(utility)
cycle button. Wash cycle
cycle button
turns on.
turns
11