Publicidad
46563 PRODUCT SPECIFICATIONS
Device Configuration
Adding your device to a Z-Wave network
Once the hub is ready to add your smart switch, press up or down
on the smart toggle switch to add it in the network.
To remove and reset the device
Once the controller is ready to remove your device, press up or
down on the smart toggle switch to remove it from the network.
S2 + SmartStart install
The controller's app will indicate if it has discovered the device. If
prompted by the controller to enter the S2 security code, refer to
the QR code/security number on the side of the box, or the QR
code label on the product. Enter the 5-digit code.
DSK :
XXXXX
-25651-22671
-26939-47599
-19612-25872
DSK/PIN CODE
-47752
Related Products - Jasco Z-Wave In-Wall Smart Controls
46561
46565
Add-On
In-Wall
Switch
Smart Dimmer
www.byjasco.com
24770
26932
In-Wall Smart
In-Wall Smart
Motion Switch
Motion Dimmer
To return to factory defaults
Quickly press up on the toggle 3 times, then press
the down on the toggle 3 times.
Certifications & Compliances
Compliances, specifications and availability are
subject to change without notice
Distributed by Jasco Products Company LLC
10 E. Memorial Rd., Oklahoma City, OK
Questions? Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM-8PM, M-F, Central Time.
©Jasco 2020
55259
55257
In-Wall Smart
In-Wall
Fan Control
Smart Outlet
CAV
CAV
3
Publicidad
