Belkin GoStudio Manual Del Usuario página 10

oVeRVIeW
seCTions
Table of Contents
GoStudio
1 2
D
C
3 4
Input/output Description
The 3.5mm jack that sits between the combo jacks can be used to
connect microphones or line-level audio sources.
The GoStudio provides "plug-in power" for small electret condenser
C 3.5mm Stereo Jack
microphones (ECMs), such as lapel mics and desktop-computer mics.
Some examples of line-level audio sources are MP3 players, guitar-
amp simulators, microphone preamplifiers, and laptop computers.
The headphone connection can be used to connect headphones
that have a 3.5mm jack, such as your iPod earbuds. The audio heard
through the headphone output will either be the audio signal that the
GoStudio is capturing or the audio from your iPod when playing back
an audio file.
Headphone Output You can also use the headphone output as a line output to connect the
D
GoStudio to another audio device with a line-level input. In this case,
you may need to turn up the monitor volume control (see the GoStudio
Controls table below).
Note that the GoStudio's speaker is disabled when headphones are
connected (see below).
8
5 6