Publicidad
Idiomas disponibles
Idiomas disponibles
Item number
Motor voltage
Motor power
No-load speed
Max.
branch
cutting diameter
Sound
power
level
Length of cable
Protection class
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Safe operating practices
Training
Become familiar with the owner's manual before attempting to operate this equipment.
Preparation
1) Do not allow children to operate this equipment;
2) Do not operate this equipment in the vicinity of bystanders;
3) Do not connect a damaged cord to the supply or touch a damaged cord before it is
disconnected from supply. A damaged cord can lead to be contacted with live parts.
4) Wear ear protection and safety glasses at all times while operating the machine;
5) Avoid wearing clothing that is loose fitting or that has hanging cords or ties;
6) Only operate the machine in open space (e.g. not close to a wall or other fixed
object) and on a firm, level surface.
7) Do not operate the machine on a paved or gravel surface where ejected material
could cause injury;
8) Before starting the machine, check that all screws, nuts, bolts, and other fasteners
are properly secured and that guards and screens are in place. Replace damaged
or unreadable labels;
Operation
1) Before starting the machine, look into the feeding chamber to make certain that it is
empty;
2) Keep your face and body away from the feed intake opening;
3) Do not allow hands or any other part of the body or clothing inside the feeding
chamber, discharge chute, or near any moving part;
4) Keep proper balance and footing at all times. Do not overreach. Never stand at a
higher level than the base of the machine when feeding material into it;
5) Always stand clear of the discharge zone when operating this machines;
6) When feeding material into the machine be extremely careful that pieces of metal,
rocks, bottles, cans or other foreign objects are not included;
7) If the cutting mechanism strikes any foreign objects or if the machine should start
making any unusual noise or vibration, shut off the power source and allow the
machine to stop. Disconnect from supply and take the following steps:
Inspect for damage;
Check for and tighten any loose parts;
Have any damaged parts replaced or repaired with parts having equivalent
specifications.
HY6606L
230-240V~50Hz
S6 : 2500W
4500/min
φ40mm
106dB(A)
0.35m
IP24
2
EN
Publicidad
