Bosch GWS Professional 17-125 SB Manual Original página 27

The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting and brushing metal,
stone, plastic and composite materials, roughing metal,
plastic and composite materials as well as making holes in
stone materials using diamond annular cutters, without the
use of water. Make sure that the correct protective guard is
used (see "Operation", page 34).
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind stone materials
with diamond grinding heads.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Spindle lock button
(3) On/Off switch
(GWS 14-125/GWS 14-125 S/GWS 17-125/
GWS 17-125 S/GWS 17-125 TS/
GWS 17-125 S INOX/GWS 17-150 S/
GWS 17-125 SB)
(4) Dust filter (GWS 14-125 / GWS 14-125 S)
(4) Dust filter
(GWS 17-125 / GWS 17-125 S / GWS 17-125 TS /
GWS 17-125 S INOX / GWS 17-150 S /
GWS 17-125 SB)
(5) Speed preselection thumbwheel
(GWS 14-125 S / GWS 17-125 S / GWS 17-125 TS /
GWS 17-125 S INOX / GWS 17-150 S /
GWS 17-125 SB / GWS 17-125 PS /
GWS 17-125 PSB / GWS 17-150 PS)
Technical Data
Angle Grinder
Article number
Rated power input
Power output
Bosch Power Tools
(6) On/off switch
(GWS 17-125 PS/GWS 17-125 PSB/
GWS 17-150 PS)
(7) Unlocking lever for on/off switch
(GWS 17-125 PS/GWS 17-125 PSB/
GWS 17-150 PS)
(8) Standard auxiliary handle (insulated gripping sur-
face)
(9) Vibration-damping auxiliary handle (insulated grip-
ping surface)
(10) Extraction guard for grinding
(11) Protective guard for grinding
(12) Protective guard for cutting
(13) Cover for cutting
(14) Mounting flange with O-ring
(GWS 14-125/GWS 14-125 S/GWS 17-125/
GWS 17-125 S/GWS 17-125 TS/
GWS 17-125 S INOX/GWS 17-150 S/
GWS 17-125 PS/GWS 17-150 PS)
(14) Preassembled mounting flange with O-ring
(GWS 17-125 SB/GWS 17-125 PSB)
(15) Carbide grinding head
(16) Grinding disc
(17) Disc brush (dia. 22.22 mm)
(18) Disc brush (M14)
(19) Cutting disc
(20) Diamond cutting disc
(21) Clamping nut
(22) Quick-clamping nut
(23) Two-pin spanner for clamping nut
(24) Handle (insulated gripping surface)
(25) Grinding spindle
(26) Hand guard
(27) Rubber sanding pad
(28) Abrasive disc
a)
(29) Round nut
(30) Cup brush
(31) Conical brush
(32) Diamond annular cutter
(33) Open-ended spanner
(34) Extraction guard for cutting with cutting guides
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GWS 14-125 GWS 14-125 S
3 601 GD0 0.. 3 601 GD0 1.. 3 601 GD0 2..
W 1400
W 830
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
GWS 17-125
1400 1700
830 1010
1 609 92A 69Z | (06.10.2022)
English | 27
a)
GWS 17-125 S
3 601 GD0 3..
1700
1010