Descargar Imprimir esta página

Linsar YLW6336 Manual Original página 67

Multi limpiador de moquetas

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

- Before use, make sure that the cleaning agent does not cause
any damage to the carpet.
- First test the detergent on an inconspicuous area of the fabric to
be cleaned to ensure that no discolouration occurs.
Pre-treatment
Apply the detergent directly to the area to be cleaned (e.g. the area to be cleaned). B.
carpet). Rub the detergent into the dirt with a brush to loosen it. Follow the detergent
instructions for the correct amount and use. Vacuum up the dirt and the detergent
used completely.
Recommended
-
Strongly alkaline, ionised water
-
Baking soda
-
Citric acid
-
Hypochlorous acid
-
Weakly acidic, electrolytic water
Do not add the cleaning agent directly to the fresh water tank 4 , but test it for
compatibility with the material to be cleaned before use.
Follow the instructions for use of the cleaning agent for the correct quantity and use.
Do not use thinners and flammable solvents.
Working with the device
WARNING!
When mixing with the vacuumed air, certain substances can form
explosive mixtures or vapours.
- Do not vacuum up any flammable, combustible, explosive or
caustic gasses, vapours, liquids and dust.
- Do not vacuum up organic solvents (such as paint thinner,
petrol or acetone).
- Do not vacuum up any flammable materials (such as wood)
- Do not vacuum up smouldering materials (such as cigarette
butts or ashes).
1. Plug the power cable 10 into a properly installed power socket.
Not recommended
-
Neutral cleaning agents for kitchen use
-
Strongly alkaline detergents
-
Strongly acidic cleaning agents
Risk of fire and explosion!
67

Publicidad

loading

Este manual también es adecuado para:

Csc-ecom