Publicidad
Idiomas disponibles
Idiomas disponibles
Music playback management
- Hold down the
track, hold down the
- Press the
- Hold down the M(5) key for a few seconds to lower the voice of the song being
played and sing on it.
TF CARD/USB
1. Insert a TF Card or a USB memory in sockets (8) or (6) and turn on the device;
2. Playback will start automatically;
3. Hold down the
+
the
(1) key for a few seconds to go to the next track;
4.
Press
(3) button to pause; press it again to resume music playback;
5. Press and hold the M(5) key for a few seconds to activate the track repeat/
sequential playback function.
AUX
1. With the device switched on, connect any unit equipped with an audio output via
the appropriate 3.5mm Jack cable to the AUX input (7);
2. The unit will automatically switch to this input;
3. Start playback from the external device. For all playback functions, refer to the
manual of the external device.
LIGHTING EFFECTS
1. To view the various light effects available, press the key (4) repeatedly;
2. Press and hold the button (4) for a few seconds to completely deactivate/activate
the light effects.
MICROPHONE
1. Turn on the microphone by holding down the key
+
2. Use the
(12) and
3. Press the key
adjust the reverberation;
4. Press the key (14) several times to vary the vocal effect.
+
(1) button on the speaker for a few seconds to go to the next
-
(2) button for a few seconds to go to the previous track.
(3)
key to pause; press it again to resume music playback.
-
(2) key for a few seconds to go to the previous track, hold down
-
(13) keys on the microphone to adjust the volume;
(11) again and use the
(11) for a few seconds;
+
-
(12) and
(13) keys on the microphone to
Publicidad
