Macally HRMOUNTPROTRAY Guia Del Usuario página 3

3. Attach the tablet/smartphone cradle on to the
cradle holder and then pull the cradle holder
downward until it clicks securely into place.
4. Slide the cradle holder onto the mount until it
clicks securely into place.
NOTE: You can place the holder either behind the
seat or at the end of the aluminum frame so that
the tablet/smartphone is centered between the
driver and passenger seats.
1
2
5. Push in the two arm-grip release buttons while
pulling up on the top arm grip. Only pull out the top
arm grip until the opening width between the top
and bottom arm grips is about ½" shorter than the
width or length of your tablet or phone to be held.
You will use the spring-loaded arm grip as the main
grip to securely hold your device into place. Slide
out the bottom arm grips for tablet.
6. Place your Smartphone/tablet onto the bottom
arm grips and pull the spring-loaded arm rip
upward (you will feel the spring) to hold your tablet
or phone securely.
Driver side seat mounting
These steps will guide you on how to flip the tray so
that it can be mounted on the back of the driver side
seat (extension arm pulling out from the right side).
Once completed please refer to step one of the
"How to use the HRMOUNTPROTRAY" section of
this users guide.
1. Completely un-loosen the tray angle adjustment
knob assembly and detach the tray from the
HRMOUNTPRO.
2