Costway TY328025 Manual Del Usuario página 3

Front fork
4 Rear wheel
5 Wheel cover
Wheel
6
connector
7
Accessories
04
Picture 1
Picture 2
2. Find the rear axle from the accessories
pack, then pass the rear axle through the
left rear wheel, the connecting piece, and
the right rear wheel in turn. Tighten the
nuts with two Allen wrenches.(As shown
in Figure 2)
4. Insert the front fork (#3) into the
head tube of main bike
frame(#1),press the center button
of the handlebar (#2) and align the
slot to insert into the head tube to
complete the balance bike
installation.
Front fork
1. Insert the wheel connector (#6) into the
rear end of the bike frame tube until the
screw holes of the connector are aligned
with the screw holes on the rear end of
the frame. Use a screwdriver to tighten
the screws, one screw on the left and
right sides. (As shown in Picture 1)
Picture 3
3. Snap the two outer wheel covers into
rear wheels respectively to complete the
rear wheel installation.
Push the
button
Picture 4
05