Installing memory modules:
Your M42 Mini PC comes with 2 DDR4 SODIMM slots, allowing the installation of 2
SODIMMs.
With the equipment, only a 4GB DDR4 SODIMM module is included.
Note: The maximum memory size supported for this computer is 16GB.
M2 solid state installation of the unit:
Your M42 Mini PC includes 1 M2 SSD pre-installed. Support M.2 SATA 2280 SSD.
To install a different M2 SSD:
1. Remove the silver screw from the board standoff.
2. Remove the pre-installed SSD memory.
3.Align the space at the bottom of the M2 SSD with the M2 connector on the board.
4. Insert the M2 into the connector.
5. Secure the SSD to the separator with the silver screw.
2.5" HDD or SSD Installation:
Your M42 Mini PC includes 1 free 2.5" SSD/HDD slot.
To install a 2.5" SSD:
1. Prepare the 2.5" SSD/HDD and screw it to the metal guides included in the
packaging.
2. Insert the HDD/SSD into the compartment.
3. Screw the guides to the base plate supports.
20