6. Snap the dock to the E-track rail using the E-track clips as shown and make sure
the dock is secured to the rail.
7. To remove the dock from the E-track rail press the release levers on the E-track
clips and pull the dock away.
NOTE:
The hole in the E-track clip can function as an anti-theft device using a padlock
(not included). The shackle diameter range is 13/64" – 9/32" (5 – 7 mm).
ANTI-THEFT BAR ON THE DOCK
(FIG. 6)
To prevent unauthorized removal of
battery packs, pull the tab of the anti-theft
bar out and secure it with a padlock (not
included). The shackle diameter range is
13/64" – 9/32" (5 – 7 mm).
PGX
COMMERCIAL CHARGING 3-PORT DOCK — PGX3000D/PGX3000D-FC
™
6
Anti-theft Bar
15