Publicidad
Idiomas disponibles
Idiomas disponibles
QUICK GUIDE
SPECIFICATIONS AND CONNECTIONS
CONFIGURATION
Device parameters: IP, extension, volume... are configured from unit's embedded Web Server. Recommended browsers are Firefox and Chrome. For more detail, refer to
"Optimus SIP web server configuration" instruction manual.
Device's IP can be found in a label in the rear panel. Using Windows7 or higher it is possible to discover the equipment automatically from the file browser by selecting the Network
icon. Is it necessary the have IPV6 and Network discovery enabled. You can also find it by typing its IPv6 address directly into the internet browser. It follows the typology
"[fe80::1a39:19ff:fexx:xxxx]" being the "x" the last six characters of the MAC address. (Login: admin, Password: admin)
Equipment has two output contacts. CT1 is used as door release contact, and it is activated during the call by dialling a configurable DTMF tone. CT2 is a status contact, for its
configuration set the equipment as follow:
- CT2 closed during the call. Configure "Status Light LED2: Lit" Call successful.
- CT2 closed during call establishment. Configure "Status Light LED2: Lit" Call in progress.
Power Source
Consumption
Dimensions
Weight
Finish
Output Contact
Protection
Optional Accessories
EP-42SIP Version 2.0
1. Speaker
2. Call button with LED indicator
3. Microphone
POE / 5 Vdc
10 W Max
186 x 123 x 40 mm
1,1 kg
Stainless Steel
CT1
Max 24 V, 2 A
CT1 +5o 5 V 200 mA
CT2 NO-C Max 24 V, 1 A
IP-65 Equivalent (with optional box)
Wall mounting box CS-EP
Flush mounting box CE-EP
1/1
SIP AUDIO STATION
EP-42SIP
WARNING:
Make sure the power outlet conforms to the power
requirements before connecting the equipment.
Do not install the unit near heat sources.
Only qualified service personnel should be allowed to
install and operate the unit.
Publicidad
