PrOo OSOiS
• Use only specified
blade and make sure it is
properly
installed and securely
fastened.
• Cut from your right to your left.
• Always
use the handlebar
and a properly
adjusted
shoulder
strap
with
Made
(see
ASSEMBLY
instructions
in
brushcutter
attachment
instruction
manua 0.
CULTIVATOR
SAFETY
WARNING:
Rotating tines can cause
serious injury.
Keep away from rotating tines.
Stop the engine and disconnect
the spark plug
before unclogging tines or making repairs.
A
m_.WARNING:
Inspect
the area to be
cultivated
before starting the unit. Remove all
debris
and hard and sharp
objects
such as
rocks, vines,
branches,
rope, string, etc.
• Avoid heavy contact with solid objects that
might stop the tines. If heavy contact occurs,
stop the
engine and inspect
the
unit for
damage.
• Never operate the cultivator without the tine
cover in place and properly secured.
• Keep the tines and guard clear of debris.
• After
striking
a foreign
object,
stop the
engh_e,
disconnect
the
spark
plug
and
inspect the cultivator
for damage.
Repair
before restarting.
• Disconnect
attachment
from the drive engine
before cleaning the tines with a hose and
water to remove any build-up.
Oil the tines to
prevent rust.
• Always
wear
gtoves
when
servicing
or
cleaning
the tines. The tines
become very
sharp from use.
• Do
not
run
unit
at
high
speed
unless
cultivating.
HEDGE
TRIMMER
SAFETY
,_DANGER:
RiSK
OF
CUT; KEEP
HANDS AWAY FROM BLADE - Blade moves
momentarily
after thetrigger is released.
Donot
attempt to clear away cut material when the
blade is in motion. Make sure the switch is in the
OFF position, the spark
plug wire is discon-
nected, and the blade has stopped moving be-
fore removing jammed material from the cutting
blade. Do not grab or hold the unit by the cutting
blade.
Blades move
momentarily
after the
dtrigger is
Allow blades to stop
before removing
them from the cut.
A
_1_WARNING:
inspect
the area before
starting
the unit. Remove
all debris and hard
objects
such as rocks, glass, wire,
etc. that
can ricochet,
be thrown,
or otherwise
cause
injury or damage
during
operation.
• Do
not use
a cutting
blade
that is bent,
warped, cracked, broken or damaged
in any
other way.
Have worn
or damaged
parts
replaced by an authorized service dealer.
• Always
keep
unit
in front of your
body.
Keep all parts of your body away from the
cutting
blade.
• Keep the cutting blade and air vents clear of
debris.
POLE
PRUNER
SAFETY
_, WARNING:
The reciprocating
blade/
rotating
chain
can cause
severe
injury.
In-
spect the unit before use. Do not operate unit
with a bent. cracked or duff blade or dull chain.
Keep away from the blade/chain.
WARNING:
The reciprocating
blade/
rotating chain is sharp.
Do not touch.
To pre-
vent serious
injury, always
stop engine and
ensure blade/chain
has stopped
moving, dis-
connect
spark
plug, and wear gloves when
changing
or handfing the blade or chain.
_WARNING:
A coasting
blade/rotat-
ing chain can cause injury while it continues
to
move
after the engine is stopped.
Maintain
proper control of the unit unfit the blade/chain
has
completely
stopped
moving.
Keep
hands,
face and feet at a distance
from all
moving parts.
Do not attempt to touch or stop
the blade or chain when it is moving.
_I, WARNING:
Falling
objects
can
cause severe head injury. Wear head protec-
tion when operating
this unit with a pole prun-
er attachment.