4. Clean Go-Cups. Go-Cups are hand washable or dishwasher safe:
• Rinse and wash by hand (before first use and after each use)
1. Use a wash basin. Place Go-Cups parts in a clean wash basin
used only for washing infant feeding equipment. Do not place
pump parts directly in the sink because germs in sinks or drains
could contaminate the Go-Cup parts.
2. Add soap and water. Fill wash basin with hot water and add soap.
3. Scrub. Scrub items using a clean brush that is used only to clean
infant feeding items. Do not insert anything into the Lip Valves.
4. Rinse. Rinse by holding items under running water, or by
submerging in fresh water in a separate basin that is used only for
cleaning infant feeding items.
5. Dry. Allow to air-dry thoroughly. Place Go-Cups parts, wash basin,
and bottle brush on a clean, unused dish towel or paper towel in an
area protected from dirt and dust. Do not use a dish towel to rub or
pat items dry because doing so may transfer germs to the items.
Rumble Tuff also provides a Drying Mesh Bag for your convenience.
• Wash in dishwasher (maximum once per day)
1. Place the disassembled parts, except for the tubing, on the top rack
or in the cutlery section.
2. Allow to completely dry after washing.
5. Sanitize Go-Cups once per day after use. Sanitize the parts according
to P.5
Note:
If using a dishwasher, parts may become discolored. This will not impact the functioning
of the parts.
6