JBM 60023 Manual De Instrucciones página 6

There are 4 different operation modes/functions available:
Drilling mode
Impact drilling
mode
Chiseling mode
Chiseling angle
adjustment mode
MAINTENANCE
• Always be sure that the tool is switched off and the battery pack is removed from the tool before attempting
to perform inspection or maintenance.
• Regularly clean the tool's air vents with compressed dry air. Do not attempt to clean by inserting pointed
objects through openings.
• Do not use cleaning agents to clean the plastic parts of the tool, a mild detergent on a damp cloth is recom-
mended instead.
TECHNICAL SPECIFICATIONS
Voltaje . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC-20V
No-load speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-1350 RPM
Impact rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-4750 BPM
Impact energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 J
Drilling capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22mm concrete, 28mm wood, 13mm steel
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,8 kg
PARTS LIST
Suitable for drilling into steel, metal,
ceramic, plastics and wood.
Suitable for drilling and impacting
into stone, concrete or brick in
masonry drilling.
Suitable for chiseling in metal plates
in high or low relief.
Suitable for selecting the desired
chuck angle direction before turning
the selector into the chiseling mode
and carry out the task.
· 6 ·
NUM. DESCRIPTION
1 Depth gauge
2 Dust protection cap
3 SDS Bit holder locking sleeve
4
Function mode selector switch
5
Trigger switch
6
Forward/Reverse rotation selector
7
Auxiliary handle
8
Battery release button
9 Battery
10 Charger
11 Point chisel
12 Flat chisel
13 SDS drill bits: 8/10/12 x 150mm
REF. 60023