PEDROLLO M/M 8.5 Manual De Uso Y Mantenimiento página 27

PART 1 - QUICK INSTALLATION GUIDE
During the initial installation and maintenance, make sure that
live.
During the initial installation and maintenance, make sure that the system is not under
pressure
to ACCESS THE DRIVE WIRING, open the front cover as shown on p. 5
DO NOT OPEN INVERTER COVERS, except for the connector cover
the inverter power supply line must be protected in accordance with current regulations, and in
particular with a high-sensitivity differential switch and magnetothermic switch
- Install the inverter in a place:
o protected from the elements
o
ventilated, free from excessive humidity or excessive dust
o as close as possible to the pump
o make sure that does not receive harmful vibrations or mechanical stress from connected
pipelines
- Control panel:
1 2 3
INSTALLATION AND HYDRAULIC CONNECTIONS
OK
OUT
IN
NO SEALING
NO CANAPA
NO TEFLON
PRELIMINARY CHECKS
4 5
Install in a
vertical
position
O-RING
Do not use
sealant in the
three-pieces
joint; are
already
equipped
O-RING
with O-Ring
1- START/STOP button
7
2- Red LED (power)
3- Green LED (status)
4- Display
5- SET button
6- Confirm button
7- Scrolling UP / DOWN
/
6
27
ends of the line wires are not
RIGHT / LEFT
NO
Do not install
in a horizontal
position
The freezing of the
liquid contained in the
inverter body causes
irreversible damage
to the inverter