Transportation Of The Product - Blomberg BRFD2650SS Manual Del Usuario

Installation
• You must wait approximately 12 hours to obtain
ice from the ice dispenser for the first time. If
there is not enough ice in the ice container, ice
may not be obtained from ice dispenser.
• Do not consume the first 30 pieces (3-4 Litres)
of ice cubes.
• First several glasses of water may be turbid
when the filter is used for the first time.
Therefore, do not consume the first several
glasses of water.
• If the water dispenser is not used for a long
period of time, first 1-2 glasses of water can be
hot.
• If a power outage or a temporary failure occurs
while the refrigerator is operating, ice can melt
down a little bit and then get frozen again. In
such a case, ice cubes can stick to each other. If
the outage or failure prolongs, ice can melt down
causing water leakage. If you experience such a
problem, empty and clean the ice container.
• Ice cubes can stick to each other if they are left
in the container for a long time.
• Water system installation of the refrigerator must
be performed by the Authorised Service Agent.
• If the product is to be connected to the water
mains, make sure that you use potable water.
• Water system of the product is designed to
operate only with water. Do not use beverage
such as soft drinks and/or juices in the water
system.
• It is recommended that the water is
disconnected if you will not be using the
refrigerator for a long period of time due to
vacation or similar reasons.
• Do not attempt to dismantle the ice container
group assembly parts.
• Do not attempt to clean the ice container
assembly without removing it from the
refrigerator.
• When taking water from the water dispenser,
remove the glass from the opening 1 second
after releasing the trigger. Thus, water in the
system will not drip into the drip tray.

3.13 Transportation of the product

1. Unplug the product before transporting it.
2. Remove water connections.
3. Secure the shelves, accessories, crisper and
etc. in the refrigerator by adhesive tape before
repackaging it.
C
Packaging must be tied with thick tapes or
strong ropes and the rules of transportation
printed on the package must be followed.
C
Original packaging and foam materials
should be kept for future transportations.
A
WARNING:
are dangerous for the children. Keep
packaging materials in a safe place away
from reach of the children.
12 / 29 EN
Packaging materials
Refrigerator / User Manual