AIMA TWIST STANDARD Manual Empleo Y Mantenimiento página 15

3) SAFETY INSTRUCTION
The operator has to use TWIST keeping all safety measures as per existing
directives. Mainly:

ALWAYS use protective glasses;

NEVER use TWIST near by of electric cables;

NEVER use TWIST if raining, storm and anyway work in dry conditions;

Before any cleaning and/or maintenance intervention disconnect electric wiring;

After use, disconnect electric wiring and place TWIST on a dry and cool site.
4) TROUBLESHOOTING – CASE HISTORIES
TROUBLE
Machine does not start
Machine does not start
Machine stops at
minimum stress
PROBABLE CAUSE
The switch was not
pushed.
Cables were not
connected.
Battery poles were
inverted
Discharged battery
INTERVENTION
Repeat switch on operations.
Verify connections
Replace fuse positioned on
extension cable box. Connect
properly battery
Recharge battery
EN
Pag.
15