Publicidad
Idiomas disponibles
Idiomas disponibles
WAC
8-24
USER
MAN
FINAL
3/2/05
12:13
PH
Page
16 0
OPERATING iNSTRUCTiONS
You
can easily
operate
this
air conditioner
by pressing
relevant
button
on the control
panel
as well as the
remote
control.
(_)
Button
The air conditioner will be started when it is energized
or will be stopped when it is in operation, if you press
this button.
Control
Panel
Mode button
Each time Mode button is pressed, the operation
mode is changed in sequence:
COOLING
FAN ONLY
ENERGY SAVING
COOLING
1
NOTE:
After setting
the mode,
allow three (3) minutes
before
switching
to another
mode.
In the FAN ONLY Mode,
Room
Temperature
display
range is from 0°C (32°F) to 38°C (99°F).
Room Temperature
below
32°F, the Temperature
display
L0.
Room Temperature
above
99°F, the Temperature
display
H1.
indication
symbols
of LED on control
panel
:
(_
Auto fan speed
._._'_" Cooling
i-Ii-l7
Low fan speed
,_
Fan only
Display
set temp
Medium fan speed
(_
Timer
Display
set timer
Fan Speed button
Used to select fan speed in sequence auto, low,
medium and high.
Timer button
Used to set or cancel timer operation.
High fan speed
_
Energy-saving
-}_!_- Heating
LED on control panel lights on when the relevant mode is in used.
When the unit is in operation, you can set OFF TIMER.When
the unit is off, you can set ON TIMER.Timer
setting range is 0 to 24 hours.
If the OFF TIMER is set, the time LED displays the remaining time to turn off the unit for only 12 seconds,
then LED shifts to display set temperature.
If you press TIMER button within the 12 seconds,
OFF TIMER
will be cancelled.
If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit. If you want to cancel
ON TIMER, press TIMER button.
•
•
Button
Used to set room temperature
in COOLING mode or used to set time in TIMER mode.
If the two keys are pressed at the same time, the temperature
LED display will alternate
between °C and °R
NOTE: Temperature setting range is from 19°C (66°F) to 31 °C (88°F).
Publicidad
