Descargar Imprimir esta página

Sleep.8 Smart Jet S Manual De Instrucciones página 19

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
PREPARATION BEFORE USING
Massage chair commissioning
• Before commissioning, please make sure there is enough space around the chair. Then use the
controller to recline down the chair backrest to the limit position, rise up the legrest to the highest
position and stretch out to the limit length.
• Testing all functions work normally, then power off the chair, return back to original position. (How
to select the program, please refer to " Controller instruction" and "display screen menu instruction" )
Before sitting in the chair
• Make sure the legrest is well installed.
• Make sure the chair is in original position, if any part is not in initial position, please power on/off
again to make the whole chair go back to original position.
CAUTION
• If the legrest rises up, please do not seat on the chair.
• Do not make the legrest to suffer from heavy loading suddenly, or it may damage the legrest
mechanism
Grounding instruction
This product must be grounded. If it should malfunction or breakdown, grounding provides a path
ofleast resistance for electric current to reduce the risk of electric shock.
This product is equipped with a cord having an equipment-grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the product if it will not fit the outlet, havea
proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug
illustrated in sketch A in following figure.Make sure that the product is connected to an outlet having
the same configuration as the plug. No adapter should be used with this (A) product.
GROUNDED
OUTLET
GROUNDING
PIN
(A)
GROUNDED
OUTLET BOX
19

Publicidad

loading