Descargar Imprimir esta página

Craftsman 536.88635 Manual página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

without
wearing adequate
winter outer
garments.
Wear footwear
that will
improve footing on slippery surfaces.
4.
Handle
fuel with care; it is highly
flammable.
6,
(a)
Use an approved
fuel container.
(b)
Never remove fuel tank cap or add
fuel to a running engine or hot
engine.
(c)
Fill fuel tank outdoors
with extreme
7.
care. Never flit fuel tank indoors.
(d)
Replace fuel tank cap securely
and
wipe up spilled fuel
(e)
Never store fuel or snow thrower
8.
with fuel in the tank inside of a
building where fumes may reach
an open flame or spark,
(f)
Check fuel supply before each use,
allowing space for expansion
as
9.
the heat of the engine (motor) and/
or sun can cause fuel to expand.
S.
Use extension
cords and receptacles
as specified by the manufacturer
for all
10.
snow throwers
with electric drive
motors or electric starting
motors.
6.
Adjust the snow thrower
height to clear
gravel or crushed
rock surfaces.
7.
Never attempt to make any adjustments
while the engine (motor) is running
11,
(except when specifically
recom-
mended by the manufacturer).
8.
Let engine (motor) and snow thrower
adjust to outdoor temperatures
before
12.
starting
to clear snow,
9.
Always wear safety glasses or eye
13.
shields during operation
or while
performing
an adjustment
or repair to
protect
eyes from foreign objects that
may be thrown from the snow thrower.
OPERATION
14.
1.
Do not operate
this machine
if you are
taking drugs orother
medication
which
15.
can cause drowsiness
or affect your
ability to operate
this machine.
2.
Do not use this machine
if you are
mentally
or physically
unable to operate
16.
this machine safely_
3.
Do not put hands or feet near or under
rotating parts. Keep clear of the
17.
discharge
opening at all times.
4.
Exercise
extreme caution when
operat-
ing on or crossing
gravel drives, walks,
18.
or roads. Stay alert for hidden
hazards
or traffic.
5o
After striking a foreign object, stop the
engine (motor),
remove the wire from
the spark plug, disconnect
the cord on
electric motors, thoroughly
inspect
the
snow thrower for any damage,
and
repair the damage before
restarting
and
operating
the snow thrower.
tf the snow thrower should start to
vibrate abnorrdally,
stop the (motor)
check immediately
for the cause_
Vibration
is generally
a warning
of
trouble.
Stop the engine (motor) whenever
you
leave the operating
position,
before
unclogging
the auger/impeller
housing or
discharge
guide,
and when making
any
repairs, adjustments,
or inspections,
When cleaning,
repairing,
or inspecting,
make certain the auger/impeller
and all
moving parts have stopped.
Disconnect
the spark plug wire and keep the wire
away from the plug to prevent
accidental
starting.
Take all possible
precautions
when
leaving the snow thrower unattended.
Disengage
the. auger/impeller,
stop
engine, and remove key.
Do not run the engine indoors, except
when starting the engine and for
transporting
the snow thrower
in or out
of the building.
Open the outside doors;
exhaust
fumes are dangerous
(contain-
ing CARBON
MONOXIDE,
an ODOR-
LESS and
DEADLY
GAS).
Do not clear snow across the face of
slopes.
Exercise
caution when changing
direction
on slopes.
Do not attempt to
cle.ar steep slopes_
Never operate the snow thrower without
proper guards, plates or other safety
protective
devices
in place.
Never operate the snow thrower
near
glass enclosures,
automobiles,
window
wells,
drop-offs,
and the like without
proper adjustment
of the snow discharge
angle. Keep children
and pets away,
Do not overload
the machine
capacity
by
attempting
to clear snow at too fast a
rate,
Never operate the snow thrower
at high
transport
speeds on slippery surfaces.
Look behind and use care when
backing.
N_ver direct discharge
at bystanders
or
allow
anyone in front of the snow
thrower.
Disengage
power to the auger/impeller
when snow thrower is transportedor
not
In use.
Use only attachments
and accessories
approved
by the manufacturer
of the
snow thrower (such as tire chains,
electric start kits, etc)_

Publicidad

loading