Descargar Imprimir esta página

SCHOLTES SWDD 129 Manual De Instrucciones página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

Wash cycles and functions
Table of wash cycles
Description of the wash cycle
Everyday wash cycles (Daily)
White Cottons (*) (1st press of the button): extremely soiled whites.
White Cottons (2nd press of the button): heavily soiled whites and resistant
colours.
Cottons Coloured (3rd press of the button): heavily soiled whites and deli-
cate colours.
Synthetics Resistant (1st press of the button): heavily soiled resistant colours.
Synthetics Delicate (2nd press of the button): lightly soiled resistant colours.
Fastwash 30Min (1st press of the button): to refresh lightly soiled garments
quickly (not suitable for wool, silk and clothes which require washing by hand).
Fastwash 15Min (2nd press of the button) : to refresh lightly soiled gar-
ments quickly (not suitable for wool, silk and clothes which require washing
by hand).
Silk/Curtains: for garments in silk and viscose, lingerie.
M
Memory: allows for any wash cycle to be stored.
Woolmark Platinum: for wool, cashmere, etc.
Drying Programmes
Cotton dry (1st press of the button):
Synthetics dry (2nd press of the button)
Wool dry (3rd press of the button)
Partials wash cycles
Fast Spin Resistents
Rinse Cottons (1st press of the button):
Pump Out (2nd press of the button)
For all Test Institutes:
*
Test wash cycle in compliance with regulation EN 50229: set wash cycle with a temperature of 60°C.
Wash functions
!
If the selected function is not compatible with the
programmed wash cycle, the indicator light will flash and the
function will not be activated.
!
If the selected function is not compatible with another
function which has been selected previously, the indicator
light corresponding to the first function selected will flash and
only the second function will be activated; the indicator light
corresponding to the enabled function will remain lit.
Stain removal
3
1
2
programme and activate the "Stain removal" programme. To
bleach during a wash cycle, pour in the detergent and any fabric
softener you wish to use, set the desired wash cycle and enable
the "Stain removal" function.
This function is particularly useful
for the removal of stubborn
stains.
Place extra compartment 3
(supplied). When pouring in
the bleach, be careful not to
exceed the "max" level marked
on the central pivot (see figure).
To run the bleach cycle on its
own, pour the bleach into extra
compartment 3, set the "Rinse"
Max.
Max.
Dry-
temp.
speed
ing
Ble-
(°C)
(rpm)
ach
90°
1200
60°
1200
40°
1200
60°
1000
40°
1000
30°
800
-
-
30°
800
-
-
30°
0
-
-
40°
800
-
-
-
-
-
-
-
-
-
-
-
1200
-
-
1200
-
0
-
-
Extra rinse
By selecting this option, the efficiency of the rinse is increased
and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
Easy iron
By selecting this function, the wash and spin cycles will be modified
in order to reduce the formation of creases. At the end of the cycle
the washer dryer will perform slow rotations of the drum; the EASY
IRON indicator light will switch on, the START/PAUSE indicator light
will flash in an orange colour and the text "END OF CYCLE" will
appear on the display. To end the cycle, press the START/PAUSE
button or the EASY IRON button. For the Silk/Curtains cycle, the
machine will end the cycle while the laundry is soaking; the EASY
IRON indicator light will switch on, the START/PAUSE indicator light
will flash in an orange colour and the text "STOP WITH WATER" will
appear on the display. To drain the water so that the laundry may be
removed, press the START/PAUSE button or the EASY IRON button.
Mini load
This function is recommended for when the load of laundry is
equal to half, or less than half, of the maximum recommended
load (see Table of wash cycles).
Detergents
Max.
Cycle
load
duration
Fabric
Wash
(kg)
softener
7
7
7
3
3
3
1,5
1
1,5
-
-
5
-
-
3
-
-
1,5
-
-
7
-
7
-
-
7
GB
11

Publicidad

loading