Skil PR0601B-00 Manual Del Propietário página 18

Adjusting the telescopic length
a. Press the telescopic button while pointing the
cutting head away from the you (1). Extend
the length of the telescopic pole by pulling it
forward from the main handle (2). It can also
be shortened by pulling it back towards the
main handle (Fig. 11a).
b. In the extended state, the telescopic pole can
be extended by 12-19/32" (320mm). Release
the telescopic button and make sure you
hear a "click", indicating that the telescopic
pole is locked (Fig. 11b).
WARNING
the telescopic pole locked. Do not adjust the
telescopic length during use.
To Start/Stop the Telescopic
Pruning Saw (Fig. 12)
a. To turn the saw ON, grasp the main handle
firmly.
b. Press the lock-off button, and then squeeze
the trigger switch.
WARNING
come in contact with the bar and chain, are in
the immediate vicinity.
c. To turn the saw OFF, release the trigger
switch and allow the chain to come to a
complete stop.
18
To reduce the risk of injury,
the saw must be used with
Make sure no objects or
obstructions, which could
Fig . 11a
Cutting
Head
Fig . 11b
Fig . 12
Lock-off Button
BRUSHLESS
Trigger Switch
Telescopic
Button