Publicidad
STEP 13
Carefully place unit on its front.
Align the back panel as shown and screw the back panel into the
back legs.
Using nails, nail straight into the raw edges of top and bottom.
8
Assure that our unit is square.
Distance from corner to corner
must be equal as shown.
8
6
(x12)
(x12)
21
IMPORTANT! THE BACK PANEL IS A STRUCTURAL
PART OF THIS UNIT AND MUST BE INSTALLED
PROPERLY.
Flush bottom edge of the back
panel with the bottom edge of
bottom (E).
6
Publicidad
