Descargar Imprimir esta página

Chasing M2 S Manual Del Usuario página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
Installation & Connection
Download CHASING GO1 App
1
EN
CHASING GO1 App:
Scan the following QR code or visit the IOS APP
Store/Google Play/Chasing website for downloading.
(For IOS 9.0 or later/Android version 4.4 or later)
Connect ROV with Remote Controller
2
1. Connect the 3m cable to the manual winder and handle respectively, and
tighten the nuts.
2. Connect the buoyancy line on the manual winder to the submersible, and
tighten the nut.
3. Reserve a suitable length, hang the buckle at the head of the cable on the
buckle bracket at the tail of the submersible and tighten it.
1
* Warning: Check whether the O-ring on the tether connector pre-dive. If it
is missed or damaged, please replace it in time.
Start (turn on) the ROV
3
a. Turn on the remote controller power button.
b. A few seconds later, the remote controller' s
indicator lights up, 5G or 2.4G light will be always on.
The drone LED lights will flash shortly,
accompanied by three self-tests sounds.
c. Check all the connectors and lights pre-dive, and
unlock the ROV when everything is ready underwater.
09
3
2
Connect remote controller to your phone/tablet
4
Method 1: USB Direct Cable Connection
Choose an appropriate remote controller
cable based on the type of mobile device. A
Lightning connector cable, micro USB
cable, and TYPE-C cable are included in
the packaging. Connect the end of the cable
with the mobile phone logo to the mobile
device.
Note: * It is recommended to use this kind of way
to connect mobile phone/tablet and remote
controller.* If the connection fails, please try to turn off
your phone's Wi-Fi and mobile network. If still fails, it
may be a phone/ tablet compatibility problem.
Please select method 2 Wi-Fi connection. * The
remote controller type-c port and attached remote
controller cables do not support charging.
Wi-Fi Connection
a. On the Phone/Tablet, go to Wi-Fi settings.
b. Wait for 5-10 seconds and the Chasing_xxxx network will appear as an option.
c. Click to connect and enter the Wi-Fi password: 12345678
6:27
89%
Wi-Fi
Settings
Wi-Fi
Chasing_xxxxx
CHOOSE A NETWORK...
Gladius_5G_xxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
EN
10

Publicidad

loading

Productos relacionados para Chasing M2 S