Chasing M2 S Manual Del Usuario página 7

App interface Introduction
5
Open the APP and enter the camera, you will see the real-time scene transmission.
EN
General
Settings
Return
VR Live Stream
Shrink Slow
Side
Video Motion
Menu
Temperature
Depth
3D
Gesture
Light
Angle Unlock/lock ROV Mode
*
Note： 1. As the drone will connect to the 2.4G Wi-Fi by default, you can switch to
5G Wi-Fi to get a better experience. (Turn on 5Ghz in the Settings-ROV, the
drone's Wi-Fi will automatically restart, and you may need to re-connect
to the Gladius Wi-Fi).
2. You could check more guidance videos on the website page https://ww
w.chasing.com/,or you could contact the global support team with any
questions ： support@chasing-innovation.com
Drop the ROV into Water
6
a. Grasp the grips on both sides of the ROV with both hands and gently throw the
ROV into the water.
b. Unlock the Thruster(motors) to dive.
c. For a better experience, it is recommended to ensure that the water depth exceeds
1 meter.
Video and Photo Download
Connect Wi-Fi
1） Connect the ROV with remote controller
by the tether, Switch remote controller
power button to on.
2） Find the Chasing_xxxxxxxx Wi-Fi on the
phone/tablet/laptop Wi-Fi list.
3） Input M2 S Wi-Fi Password ： 12345678
11
Compass Signal Strength
Battery
Balance
Picture
Recording
Camera
Settings
Accessory
6:27 89%
Wi-Fi
Settings
Wi-Fi
Chasing_xxxxx
CHOOSE A NETWORK...
Gladius_5G_xxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
Download to Phone/Tablet
1） Open CHASING GO1 App, click the Media
button in the lower right corner.
2） Find the video/photo that you want to
download. Click the download button and
the image will be saved directly to the
White
phone/tablet's photo album (Download
Lock
folder).
Video
Download to Computer
1） Open the web browser and type IP ad-
Dock
dress:192.168.1.88
2） Find the video/photo that you want to
download. Click the download icon and
save, then the images will generally save
in the Download folder.
3） It is recommended to use Firefox or Google
Chrome browser for better experience.
Micro SD card copy
1） Remove the cover on the SD card socket
counter clockwise, then open the waterproof
rubber plug， and gently press the SD card. It
will pop up aut-omatically, then remove the
SD card.
2） Read the SD card in a Card reader, and copy
the images with computer.
3） Insert the SD card back to the SD card socket
after copying the images, press gently to
ensure the SD card and waterproof rubber
plug are locked, and tighten the cover
clockwise downward.
(laptop or the computer which could use Wi-Fi)
Media
Not secure | 192.168.1.88
1/11
EN
12