SAKAWA AS6T Manual Usuario página 56

Specs
Trunk measurements
Hydraulic pressure
Hydraulic oil capacity
* The diameter of the trunk is indicative - a small trunk can be difficult to divide, especially if it has
knots or is hardwood. On the other hand, it is not usually difficult to divide softwood logs, even if
the diameter is larger than indicated.
Electrical Requirements
Connect the main cable to the standard current of 230v+10% (50Hz+1Hz), which has protection
devices for possible voltage drops, overloads, as well as a residual current device (RCD) that the
maximum rated residual current is 0.03A.
Commissioning
1. Screw the bolt of the chipper holder, lift the chipper by the handles at both ends to a height of
60 to 75 cm, stabilize it, placing it horizontally and on a flat surface.
2. Familiarize yourself with the controls and characteristics of the chipper according to the
following illustration
Model
Engine
Diameter*
Longitude
Tons
Global size
Longitude
Width
Height
Weight
AS6T
230 V ~ 50 Hz
2200 W IP54
5-25CM
52 CM
5 t
20 Mpa
3.5 L
940 MM
270 MM
510 MM
45 Kg.
56