14-EN
INSTRUCTIONS FOR USE
-Clean the filter holder, filter and water jug with soapy water
before use.
-Before using the coffee machine for the first time, fill in the tank
with cold water and make it work without coffee in order to clear
the circuit.
-Open the water tank lid and pour in the desired amount of
water. Depending on the number of cups you want, fill the
water tank to the corresponding mark. Do not pour more than
the maximum amount, set as MAX. Once completed, close the
water tank lid.
-Place the glass jar on the heating plate.
-Fill the filter with the desired amount of coffee with the teaspoon
provided. Once filled, close the filter holder over the glass jar
lid.
-Fully unroll the cable from the base, plug the coffee machine
in the socket and press the switch to position I, a red light will
be switched on indicating that the coffee machine has started
heating the water and the coffee will start to trickle out.
-Once the process has finished, you can remove the jar with no
problems, as this coffee machine has an anti-dripping system
preventing the coffee from spilling. If you wish to keep the coffee
warm, do not switch it off. Leave the light on. The light will only
go off when the switch is in the position O.
-After each use, switch off the coffee machine by turning the
switch to position O.
-The coffee machine will only be completely switched off when
unplugged from the socket.
-Always unplug the machine from the socket when you have
finished using it.
CLEANING AND STORAGE
-Before cleaning, make sure the coffee machine is switched off
from the socket and that it has fully cooled down.
-Never use abrasive detergents or products that can damage
the machine.
-NEVER SUBMERGE THE MACHINE IN WATER OR ANY OTHER
LIQUID.
-Clean the coffee machine by first wiping it with a slightly damp
cloth and then with a dry cloth.
-To clean the filter holder, filter and glass jar use soapy water and
dry with a cloth.
-Keep the machine safely stored.
TECHNICAL SPECIFICATIONS
220-240V ~ 50Hz 650W
This device conforms to the safety requirements and provisions of
directives 2006/95/EC on Low tension devices and 2004/108/EC
on Electromagnetic Compatibility.
PROTECTION OF THE ENVIROMENT – DIRECTIVE
2002/96/EC
This product has been designed and manufactured with high
quality materials and components that can be recycled and
reused.
When you see the symbol of a crossed out litter bin on
wheels next to a product, this means that the product
conforms to the European Directive 2002/96/EC.
Please obtain information about the local recycling
system for electric and electronic products.
Follow the local rules and do not dispose of used products by
throwing them in the normal bins at home. Proper recycling
of your used product will help avoid negative impacts on the
environment and people's health.
EN-15