Keeper KP 25 Manual De Usuario página 14

KP25
5. Clean up the area of blade (9) and then add grease.
6. Assemble the upper blade (11) as shown in the figure.
7. Cover the blade cover(12) as shown in the figure.
8. Tighten the self-tapping screws clockwise (13) as shown in the figure.
9. After adding grease to the side of the locking screw (14) as shown in the figure,
assemble the various parts in order and finally screw on the M5 hexagon socket
screw clockwise.
14
www.gruposanz.es