Evolution R120MXR-Li Instrucciones Originales página 8

has been deposited on surfaces, hand to mouth
contact can result in the ingestion of lead.
Exposure to even low levels of lead can cause
irreversible brain and nervous system damage.
The young and unborn children are particularly
vulnerable.
You are advised to consider the risks associated
with the materials you are working with and to
reduce the risk of exposure. As some materials
can produce dust that may be hazardous to your
health, we recommend the use of an approved
face mask with replaceable filters when using this
machine.
You should always:
• Work in a well-ventilated area.
• Work with approved safety equipment, such as
dust masks that are specially designed to filter
microscopic particles.
WARNING: the operation of any power tool can
result in foreign objects being thrown towards
your eyes, which could result in severe eye
damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with
side shield or a full face shield where necessary.
ADDITIONAL SAFETY INSTRUCTIONS
• A suitable industrial mixing tub, preferable
plastic, should be sourced and sited on a
secure and stable horizontal surface.
• The operator should adopt a secure stance
with both feet firmly planted and slightly
apart. This machine also requires the use
of both hands. This machine cannot be used
'one handed'.
• The operator should wear close fitting work
clothes or a fitted boiler suit when using
this equipment. Loose fitting clothes pose
a hazard as they can become entangled in the
rotating parts of the machine.
• Loose jewellery and jewellery chains etc should
be removed and safely stored before operating
this machine. Loose jewellery can pose a hazard
as it can become entangled
in the rotating parts of the machine.
• The operator should hold this machine firmly
by the insulated handles which have an
ergonomic gripping surface.
• Safety eye goggles or a full face mask should
always be worn to provide protection from
material that could be accidentally ejected
from the mixing tub during mixing operations.
• A dust mask should be worn to provide
protection from any material that may be
ejected from the mixing tub, especially during
the initial mixing process.
• The machine should only be started with the
mixing paddle in the mixing tub. Start the
machine with the speed set at the lowest
www.evolutionpowertools.com
speed setting and gradually increase the
speed until the optimum mixing performance
is achieved.
• The operator should never reach into the
mixing tub or insert any other objects or tools
into the mixing tub while mixing
is in progress.
• This machine should not be used in
environments with a potentially explosive
atmosphere. This could include factories,
garages and other enclosed spaces (bakeries,
grain silos etc) which may contain significant
amounts of airborne dust or other particles.
• This machine should not be used to mix
any readily flammable solvents or solvent
containing substances with a flash point
of below 21° C.
• During operations if the machine is to be
stored temporally (by being placed on a
horizontal work surface), the operator must
ensure that the machine is placed on its
handles with the paddle providing a third
contact point.
8